产品均不带任何logo或标志，适合做出口欧美国家，不涉及品牌侵权。

适合各大电商平台，诚邀大家购买。

产品详情：

全系主流汽车芯片支持读写、擦除、解锁与解密。集成气囊修复、仪表校正、方向锁及车身模块维修、防盗匹配、钥匙检测解锁多功能于一体。

兼容日系、德系、美系、韩系及轿车、SUV、商用车全车型。

内置车型专用接线图，上手简单。

支持自定义编程与一键刷写，软件持续迭代更新。

整机自主研发，运行稳定、抗干扰强，专业汽修匹配专用。

注意：

1. 焊接完成后，请检查所有接线，确保接线正确。

2. 请勿自行延长CLK线与GND‑C线，否则会出现数据读取失败问题。兼容六脚、八脚芯片烧录。

CK‑PROG 主机规格：

USB 接口：USB 2.0

外接电源：12 V / 2 A

功率：1 W

产品尺寸：176 mm × 101.5 mm× 31 mm

配件说明：

标配 MCU 专用编程主线，分色分区布线，线号标识清晰，焊接安全稳定。

标配 ATMEGA 适配器，支持 8 脚 / 16 脚 / 32 脚芯片；配备通孔免焊锁紧座以及 3 个焊接位，可用于仪表调校与芯片擦除。

标配 8 脚转接板，可搭配转接座使用，用于 8 脚芯片的编程读写。

操作简述：

设备连接电脑或 12V 电源即可开机使用，按车型或芯片型号选择对应功能。

参照设备内置接线示意图完成线路连接，装好芯片及配套适配器。

按需进行芯片读写、数据刷写、气囊仪表修复、钥匙匹配写启动等操作。

开箱检查：

1 × CK‑PROG 主机

1 × ATMEGA 适配器（标配）

1 × SOP8-适配器（标配）

1 × MCU‑Cable V1 编程线束

1 × EE线束

1 × 电源线

1 × USB 数据线

所有商品均为实拍照片，未从互联网下载，请安心购买。

色差说明：

因拍照的背景、光线、及电脑显示器还原度的不同而造成的商品色差和色彩会有所不同。

以上因素造成的色差不在可控范内，不属于产品的质量有问题。

请以商品实物为准。

如果您介意轻微色差及小瑕疵，请仔细考虑后再订购。

The products don't carry any logos or signs and are suitable for export to European and American countries without any brand infringement.

Suitable for major e-commerce platforms, we sincerely invite everyone to purchase.

Specification:

The CK-PROG device supports data reading and writing for multiple chip types, including the SPC56xx/MPC56xx/SPC564xx/MAC7 series, MC68HC(9)12 series, TC2xx series, XC2xx series, FS32K1xx series, 9s12/9s08/M68Hxx series, H8SR5F61725 series, ATMEGA series, PIC16/PIC18 series, S6J series, RH850(R7F7) series, RL78(R7F1/R5F5) series, STM8 series, V850(D70F) dual-wire series, V850(DF70) single-wire series, MB91 series, and EEPROM chips.

It supports programming operations such as chip reading, writing, erasing, unlocking, locking, and data verification. It also allows users to customize menu programming data for one-click flashing.

Wiring diagrams are provided according to vehicle model options for convenient connections.

Attention:

1. After soldering, please inspect all connections to ensure they are correctly connected.

2. Do NOT extend the CLK line or the GND-C line yourself, as this may cause data reading failures.

CK Prog Main Unit Specifications:

USB Interface: USB 2.0

External Power Supply: 12V/2A

Power: 1W

Product Dimensions: 176mm x 101.5mm x 31mm

Accessories Introduction：

Standard MCU dedicated programming mainline, color separation partition, clear wire number, safe and stable welding.

Standard ATMEGA adapter, supports 8/16/32-pin chips. Comes with through-hole solderless lock socket and 3 solder positions; enables meter calibration and chip erasure.

Standard 8-pin adapter board, used together with an adapter socket to program 8-pin chips.

Operation Overview：

The device can be turned on and used by connecting it to a computer or a 12V power supply. Select the corresponding function according to the vehicle model or chip model.

Refer to the built-in wiring diagram of the device to complete the circuit connection, install the chip and matching adapter.

Perform chip read and write, data flashing, airbag instrument repair, key matching, write start, and other operations as needed.

Package Includes:

1* CK-PROG Main Unit

1* ATMEGA Adapter (Standard)

1* 8-pin Adapter Board (Standard)

1* MCU-Cable V1 Programming Cable

1* 8-pin Solderless Harness

1* Power Cord

1* USB Data Cable

Color difference description:

1.Due to the background of the photo, light, and computer monitor reproduction degree of the different products caused by the color difference and color will be different.

2.The color difference caused by the above factors is not controllable, does not belong to the quality of the product has a problem.

3.Please take the goods in kind shall prevail.

4.If you mind the slight color difference and small defects, please consider carefully before ordering.